Please select a browser below to access instructions for configuring your browser to use the certificates on your CAC.

1. Cac Card Reader Software Download For Mac
2. Download Cac Card Reader Software For Mac
3. How To Use Cac On Mac
4. How To Install Cac Reader On Mac

IE and Chrome

First check whether your certificates are already available to your browser.

For Internet Explorer 8.0 and above:

1. Navigate to Tools > Internet Options > Content and click Certificates.
2. On the Personal tab, review the list of certificates to determine if your CAC certificates are in the list. The certificates on your CAC will be issued by a DoD CA.
3. If the certificates appear in the list, you are finished. If the certificates do not appear in the list, please see the note below.

For Google Chrome:

To use a Precise Biometrics Tactivo Reader please purchase Sub Rosa Pro. Sub Rosa supports industry and U.S. Government standards including ISO 7816, NIST IR 6887, HSPD-12, OMB-11-11, FIPS 140-2, and FIPS 201 (with an approved reader). Most popular smart card types are supported including CAC, Dual Persona CAC, PIV, and PIV-I. To install a driver onto your computer for a CAC reader, you need to first download the correct driver for the hardware you purchased, I have drivers for the most common USB Readers, Keyboard, laptop, & desktop card readers. Double-click My Computer. Look for the card reader under Devices with removable storage. SOLUTION 3 - Try other USB ports.

1. Windows 10 Smart Card Reader and Military Common Access Card. SOLUTION FOUND!!! There is an opensource software called “Smart Card Manager” which is referenced on militarycac.com as an alternative to using ActivClient 6.2 (AKA for those of us that can’t access a CAC secured site to download a program designed to enable the use of a CAC.
2. Software you will need.CAC Reader Driver (reader “talks” to computer).ActivClient (card “talks” to Windows).LotusForms (view forms) (replaced PureEdge).ApproveIt (sign forms).All software is accessed using your AKO username / password. However, do download Lotus & ApproveIt requires you can login with your CAC first.

1. Navigate to Tools > Options > Under the Hood and click Manage Certificates in the HTTPS/SSL section.
2. On the Personal tab, review the list of certificates to determine if your CAC certificates are in the list. The certificates on your CAC will be issued by a DoD CA.
3. If the certificates appear in the list, you are finished. If the certificates do not appear in the list, please see the note below.

NOTE: If your certificates are not in the list and you’re using ActivClient, please make sure it is installed correctly. If your certificates are not in the list and you are using other middleware, you can contact your CC/S/A for more information on the middleware requirements for your organization. You can find their contact information on our Contact Us tab.

Firefox

Below are complete instructions for using Firefox with your CAC. You may also download these instructions.

Install Certificates from InstallRoot

1. Download and install the InstallRoot tool following the instructions in the InstallRoot User Guide or watch this video to learn how:
2. Open the InstallRoot tool and select Firefox/Mozilla/Netscape from the Select Trust Store picklist at the bottom of the window.
3. Ensure only the top Install DoD NIPRNET Certificates box is checked.
4. Click the Install button and wait for the installation to complete. Please wait until you see a confirmation dialog indicating the tool is finished.

Using Common Access Card (CAC) certificates in Firefox

These instructions will enable ActivIdentity’s ActivClient software to work within Firefox. Before proceeding, try to ensure the latest version of ActivClient is installed by going to the ActivClient website to check the latest version. Before installing the latest version, please uninstall any previous versions of ActivClient.

As of version 6.2, ActivClient by default configures Firefox to accept the CAC certificates without any additional configuration. You may use the following instructions to verify that it has been installed properly. If using an older version of ActivClient, these instructions will assist with proper configuration.

1. Open Firefox
2. Click on Tools > Options in the menu bar.
3. In the Options window, go to Advanced > Encryption > Security Devices.
4. In the new window, click on Load.
5. Enter “ActivClient(CAC)” for the Module Name.

   Click Browse to the right of the Module Filename Toyota techstream registration key. field. Browse to the location of the ActivClient PKCS11 library, acpkcs211.dll. This is typically located at C:Program Files (x86)ActivIdentityActivClientacpkcs211.dll in ActivClient 6.2, and C:Windowssystem32acpkcs201-ns.dll in ActivClient 6.1 and earlier.

   Click OK, and then OK again in the confirmation window. Dfx audio enhancer full crack 2020.

6. The confirmation message will show that the security device (CAC) was loaded. CAC certificates can now be used with the browser. Click OK to close the window.

Ensure the Online Certificate Status Protocol (OCSP) is Performing Revocation Checking

With any versions of ActivClient later than 6.2, these settings will be automatically configured. However, these instructions can be used to confirm proper configuration for older versions of ActivClient.

1. Open Firefox
2. Click on Tools > Options in the menu bar.
3. In the Options window, go to Advanced > Encryption > Validation.
4. Ensure the option Use the OCSP to confirm the current validity of certificates is checked. Also ensure When an OCSP server connection fails, treat the certificate as invalid is checked.

Safari

To get started you will need:

• CAC (see note below)
• Card reader

You can get started using your CAC on your Mac OS X system by following these basic steps:

1. Get a card reader
   Typically Macs do not come with card readers and therefore an external card reader is necessary. At this time, the best advice for obtaining a card reader is through working with your home component. In addition, please review the DoD CAC Reader Specifications for more information regarding card reader requirements.
2. Download and install the OS X Smartcard Services package
   The OS X Smartcard Services Package allows a Mac to read and communicate with a smart card. In order for your machine to recognize your CAC certificates and DoD websites as trusted, the installer will load the DoD CA certificates on OS X. Please refer to this page for specific installation instructions.
3. Address the cross-certificate chaining Issue
   These instructions walk through adjusting the trust settings on the Interoperability Root CA (IRCA) > DoD Root CA 2 and the US DoD CCEB IRCA 1 > DoD Root CA 2 certificates to prevent cross-certificate chaining issues. This can make it appear that your certificates are issued by roots other than the DoD Root CA 2 and can prevent access to DoD websites.
4. Configure Chrome and Safari, if necessary
   Safari and Google Chrome rely on Keychain Access properly recognizing your CAC certificates.
   1. In Finder, navigate to Go > Utilities and launch KeychainAccess.app
   2. Verify that your CAC certificates are recognized and displayed in Keychain Access

Note: CACs are currently made of different kinds of card stock. To determine what card stock you have, look at the back of your CAC above the magnetic strip. Most CACs are supported by the Smartcard Services package, however Oberthur ID One 128 v5.5 CACs are not. Third party middleware is available that will support these CACS; two such options are Thursby Software’s PKard and Centrify’s Express for Smart Card.

NOTE:

Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites

Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) or Big Sur (11.xx.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the native smart card ability (very bottom of macuninstall link above)

If you purchased your Mac with OS Catalina (10.15.x) or Big Sur (11.xx.x) already installed, you can skip the uninstall part above and follow the instructions below. Ashampoo winoptimizer 2019 free download.

6 'high level' steps needed, follow down the page to make this a painless systematic process

Step 1: Is your CAC reader Mac friendly?

Visit the USB Readers page to verify the CAC reader you have is Mac friendly.

Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.

'Some, not all' CAC readers may need to have a driver installed to make it work.

NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).

Information about these specific readers are in Step 2

Step 2: Can your Mac 'see' the reader?

Plug the CAC reader into an open USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click 'System Report..' (button)

Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.

Step 2c1: Verify firmware version on your SCR-331, SCR-3310 v2.0, GSR-202, 202V, 203, or SCR-3500a reader. If you have a reader other than these 6, Proceed directly to step 3

Step 2c1a-SCR-331 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1b-SCR-3310 v2.0 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCR3310 v2.0 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 6.02, it will not read the 'G+D FIPS 201 SCE 7.0' CAC on Mac OS 11.xx.x or 10.15.7. I contacted HID (the company that makes these readers) on 14 DEC 2020 to find a way to update the firmware to 6.02. They said there is not firmware update for the reader. If your reader is older, you may need a new one. Please look at: https://militarycac.com/usbreaders.htm to find a compatible one. If you are already at version 6.02, your reader should work fine on your Mac and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1c-SCR-3500A reader

If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open

Step 3: Verify which version of MacOS you have?

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Step 3b: Look below Mac OS X for: Example: Version 10.X.X, or 11.X

Step 4: Figure out which CAC (ID Card) you have

(You need to know this information for step 6)

Look at the top back of your ID card for these card types. If you have any version other than the seven shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Step 5: Install the DoD certificates (for Safari and Chrome Users)

Go to Keychain Access

Click: Go (top of screen), Utilities, double click Keychain Access.app

(You can also type: keychain access using Spotlight (this is my preferred method))

Select login (under Keychains),and All Items (under Category).

Download the 5 files via links below (you may need to <ctrl> click, select Download Linked File As.. on each link) Save to your downloads folder

Please know.. IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.

https://militarycac.com/maccerts/AllCerts.p7b,

https://militarycac.com/maccerts/RootCert2.cer,

https://militarycac.com/maccerts/RootCert3.cer,

https://militarycac.com/maccerts/RootCert4.cer, and

Double click each of the files to install certificates into the login section of keychain

Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:

DOD DERILITY CA-1

DOD EMAIL CA-39 through DOD EMAIL CA-44,

DOD EMAIL CA-49 through DOD EMAIL CA-52,

DOD EMAIL CA-59,

DOD EMAIL CA-62 through DOD EMAIL CA-65

DOD ID CA-39 through DOD ID CA-44,

DOD ID CA-49 through DOD ID CA-52,

DOD ID CA-59,

DOD ID CA-62 through DOD ID CA-65

DOD ID SW CA-45 through DOD ID SW CA-48,

DoD Root CA 2 through DoD Root CA 5,

DOD SW CA-53 through DOD SW CA-58,

DOD SW CA-60 through DOD SW CA-61, and

DOD SW CA-66 through DOD SW 67

NOTE: If you are missing any of the above certificates, you have 2 choices,

1. Delete all of them, and re-run the 5 files above, or

2. Download the allcerts.zip file and install each of the certificates you are missing individually.

Errors:

Error 100001 Solution

Error 100013 Solution

You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates

You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates

Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.

You may be prompted to enter computer password when you close the window

Once you select Always Trust, your icon will have a light blue circle with a white + on it.

The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.

The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x

If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding

Clearing the keychain (opens a new page)

Please come back to this page to continue installation instructions.

Step 5a: DoD certificate installation instructions for Firefox users

NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability

Download AllCerts.zip, [remember where you save it].

double click the allcerts.zip file (it'll automatically extract into a new folder)

Option 1 to install the certificates (semi automated):

From inside the AllCerts extracted folder, select all of the certificates

Cac Card Reader Software Download For Mac

<control> click (or Right click) the selected certificates, select Open With, Other..

In the Enable (selection box), change to All Applications

Select Firefox, then Open

You will see several dozen browser tabs open up, let it open as many as it wants.

You will eventually start seeing either of the 2 messages shown next

If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

or

'Alert This certificate is already installed as a certificate authority.' Click OK

Once you've added all of the certificates..
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Option 2 to install the certificates (very tedious manual):

Click Firefox (word) (upper left of your screen)

Preferences

Advanced (tab on left side of screen)

Certificates (tab)

View Certificates (button)

Authorities (tab)

Import (button)

Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.

Note: You have to do this step for every single certificate

Note2: If the certificate is already in Firefox, a window will pop up stating: 'Alert This certificate is already installed as a certificate authority (CA).' Click OK

Note3: If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

Once you've added all of the certificates..
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Download Cac Card Reader Software For Mac

Step 6: Decide which CAC enabler you can / want to use

Only for Mac El Capitan (10.11.x or older)

How To Use Cac On Mac

After installing the CAC enabler, restart the computer and go to a CAC enabled website

NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x), Catalina (10.15.x), and Big Sur (11.x) computers no longer need a CAC Enabler.

How To Install Cac Reader On Mac

Try to access the CAC enabled site you need to access now

Mac support provided by: Michael Danberry